交货单元

单元长度

PCB area size :

Layer NC : No Copper
单面板
双面板
四层板
六层板
八层板
十层板 -

板料 / Tg Value i

成品板厚

阻焊油墨

Solder Mask Color

Solder Mask Color type

内层铜厚符合IPC 6012 and IPC–A-600G
厚度默认为外层完成铜厚

Outer Copper Base

外层铜厚符合IPC 6012 and IPC–A-600G
Thickness considered for finished outer copper

Plugging viaFollowing IPC rules 4761-3A
The plug in vias must be identified by a special layer in the Gerber Data. If not , we cannot produce the plug ing vias
The plug in via will be done by a non conductive ink before or after solder mask process
The ink brand will be different of the solder mask one
The plugged vias will be done before finishing process
The via will not be filled at 100% of the length

Via filling material

表面处理化学沉金(金厚≥0.025um;镍厚≥2um)
化学沉金(金厚≥0.05um;镍厚≥4um)
无铅喷锡(锡厚:1-50um)
有机保护膜

Extra prepregs

UL countryUL certificates are in accordance with UL 94 V-0.

美国US1.56 µg/cm², following IPC rules, if you need a better value contact us.

印碳油如果有的话，用碳油导通。

Mask option在线路板装配时，能保护覆盖的那部分表面。rn而且很容易地去除
小于整个板的面积的20%

阻抗控制公差:+/-20%

V-scoring

最小过孔孔径

线宽线距

IPC

CTI600相比漏电起痕指数

字符

阻焊油墨颜色

Press fit holesPress fit holes are plated through holes with tighter tolerances
than the standard +/-0.10mm.
Press fit holes fit the leads of connectors that will not be soldered
but pressed into the holes.

生产周期工程问题关闭后的生产周期
工程问题基于制作资料
WD:工作天

运输方式

到达的国家

发货日期从厂里发货日期

送货日运输时间

Estimated Delivery Date交货周期
工作日
Delivery date of your PCBs will be confirmed after Engineering Questions are over
(Raw material availability dependent)

StencilStencil Material : Steel 304-H-TA

Stencil thickness

Stencil Edge

FrameThe key benefit of framed stencils is that they are pre-stretched