My account My order My quotes

ラボオンラインサービス-基板テストと分析

プリント回路基板の分析見積もりをリクエストする
実行するテストを選択し、見積もりを確認後、検証基板をお送りください
弊社ラボがテストと分析を行い業界標準に従ったレポートで48時間で回答いたします
Our laboratories are in China and North-America.



テスト Testing time 費用 選択
PCB Validation test (solderability test) 2 日々 $ 190 このテストを選択

説明:

Solderability test by weeting balance method and meniscograph.

納品レポート

IPC規格に準拠したはんだ付け性テスト

使用した機械:

ASIDA-KH23-はんだポット

断面 2 日々 $ 170 このテストを選択

説明:

断面測定によるIPC規格に準拠した測定と分析レポートが提供されます

納品レポート

IPC規格に準拠したIC測定

使用した機械:

キーエンスVHX-5000-高性能デジタル顕微鏡

STRUERSLaboPol-20-自動研削盤

Microsection PCB Thermal shock (2 microsections) 3 日々 $ 310 このテストを選択

使用した機械:

ESPECTSE-12-A-熱衝撃試験機

納品レポート

熱衝撃+2断面

説明:

断面を実行してから、熱衝撃(-40〜 + 150°C / 10秒)を実行し、熱衝撃後に断面を作成します。

Microsection PCB Ageing test per 24H (2 microsections) N/A $ 310 このテストを選択

説明:

Perform one cross-section. Do ageing test (-40 to +150°C / 25 to 98% HR). Perform a second cross-section. Provide report with cross-section before and after ageing test and parameters

使用した機械:

GWSEL-02KA-温度および湿度エージングチャンバー

納品レポート

老化試験+2断面(前後)

イオン汚染 2 日々 $ 120 このテストを選択

説明:

Ionic contamination measurement based on static method according to IPC-TM-650 (µg/cm2 equivalent NaCl Vs Time)

納品レポート

Ionic contamination static measurement in µg/cm2 equivalent of NaCl.
Report with IC data curve in µg/cm2 equivalent NaCl depending of the timing.

使用した機械:

METRONELECCT100-イオン汚染テスター

機械的寸法・小 2 日々 $ 119 このテストを選択

説明:

CpKレポートによる機械的寸法チェック。最大寸法200x100mの32個の基板

納品レポート

機械的測定+ Cpk

使用した機械:

キーエンスIM6225-画像寸法測定システム

機械的寸法・大 2 日々 $ 144 このテストを選択

説明:

機械的寸法チェック。最大寸法400x300mの基板1個

納品レポート

機械的測定

使用した機械:

ASIDA4030-2次元測定機

Tgテスト 3 日々 $ 200 このテストを選択

説明:

Measure the glass transition temperature (TG)

納品レポート

示差走査熱量測定

使用した機械:

TAインスツルメンツディスカバリーDSC-25-DTGテスター(示差走査熱量測定)

Surface finish thickness (Au, Ni, Ag, Hasl, Sn) 2 日々 $ 80 このテストを選択

説明:

金とニッケルの厚測定を実行します(基板ごとに10ポジション)

納品レポート

X線測定(10ポジション)

使用した機械:

FISHER XDLM-PCB200-XRF(フィッシャー)

EDX分析を外部委託 5 日々 $ 227 このテストを選択

説明:

Find out what are the chemical components of your PCB on a dedicated area.

納品レポート

レポート(EDX分析を外部委託)

使用した機械:

HITACHI SU8230- EDX(エネルギー分散型X線分光法)


基板長(mm)

基板幅(mm)

単位


テスト後の返品基板

分析結果の納期は、当ラボで検証基板を受領時に確認されます
To send your PCBs, please fill in the sending form emailed to you after placing your order.


関連する場合ファイルをドラッグアンドドロップまたは、クリックしてファイルを選択

ICAPE基板価格と納期にアクセス

アカウントの作成/サインイン


ICAPEおよびCIPEMショップの新機能

検証には最大1日かかる場合があります

既存のICAPEまたはCIPEMショップのクライアント


Test Testing time Cost Select
PCB Validation test (solderability test) 3 Days $ 350 Select this test

説明

The test includes:

• Microsection PCB

• Solderability test

• Thermal Stress (10 second solder float)

• Thermal Stress coupon Evaluation for cracks, voids, de-lamination

• Surface Finish thickness by XRF measurement

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Microsection PCB 3 Days $ 275 Select this test

説明

PCB Micro-section analysis of the copper and “hole” quality is the most thorough of all of the tests as it allows the examiner to look “inside” the PCB at the quality of the construction, the copper plating, the hole formation, the dielectric separation (which also defines the AC impedance), the lamination Process, and the base copper.

The IPC has defined 42 different “rejectable” defects that can be seen in one micro section.

The test includes:

• Extract a part of the PCB to to look “inside” the PCB

• In-hole Copper Thickness (Minimum of 6 readings)

• Base copper thickness (all layers)

• Plated copper thickness

• Wicking Length (if excessive)

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Microsection PCB Thermal shock (2 microsections) 3 Days $ 500 Select this test

説明

Perform one cross-section before and after the thermal shock test (-40 to +150°C / 25 to 98% HR).

Provide report with cross-section before and after the thermal shock test.

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Microsection PCB Ageing test per 24H (2 microsections) 3 Days $ 500 Select this test

説明

Perform one cross-section before and after the ageing test (-40 to +150°C / 25 to 98% HR).

Provide report with cross-section before and after ageing test.

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Chamber testing 3 Days $ 30/hour (On request) Select this test

説明

Thermal shock testing is a cycling of low and high temperature to accelerate failures caused by repeated temperature variations during normal use conditions. In our case, we can perform temperature and humidity variation.

Machine

T5S5 Environmental Test Chamber: Heat, Cold and Humidity

Price for a specific analysis on request

1 to 24 hours : $ 30/hour

Minimum value for command : 1h

For more, please contact us to: sales@divsys.com

Ion Chromatography 4 Days $ 450 Select this test

説明

Separates the different ions to be able to measure the concentration of each of them.

Ion Chromatography per IPC TM 650 method 2.3.28.

• Ion Chromatography (IC) is employed when the sample fails the IPC maximum acceptability or if the customer has defined a maximum concentration of a specific ION.

• For the Ion Chromatograph, there are two types of ions (Anions and Cations). In PCB fabrication, we are usually only concerned with Anions and hence the measurement standard using eqivalent micro grams of chloride.

• However, in the no-clean flux of PCBA processing, we also can have Cations. This requires a different measurement system. Both types of ions must be measured and noted for a PCBA.

Machine

Dionex ICS-2100, Dionex AQUION and ASDV

Dionex AQUION

ASDV

Ionic contamination 3 Days $ 250 Select this test

説明

Cleanliness Testing is used to measure the amount of ionic contamination left on the surface by the PCB process.

A cleanliness tester is filled with a solution of 75% AIPA and 25% DI H20 to dissolve the surface contamination.

The PCB (Or PCBA) is immersed in the solution. This is a Go / No go test that the PCB or PCBA is clean.

The resulting “dirty” solution is measured and converted to a standard using “Equivalent Micro Grams of Sodium Chloride” which is divided by the surface area of the sample to arrive at a ug/in2 or ug/cm2.

The IPC acceptance is < 10ug/in2 or < 1.65ug/cm2.

Standard cleanliness per IPC TM 650 method 2.3.25.

Machine

SCS Ionograph BT Series

Mechanical dimension 3 Days $ 150 Select this test

説明

Mechanical dimension checking.

Machine

View Summit System (Non contact CMM).

Tg measurement by DSC 3 Days $ 350 Select this test

説明

Measure the glass transition temperature (TG) of the PCB.

Machine

Ta Instruments Q20 DSC (Differential Scanning Calorimeter).

Surface finish thickness (Au, Ni, Ag, Hasl, Sn) 3 Days $ 150 Select this test

説明

Measurement of the surface finish thickness (Au, Ni, Ag, HASL, Sn) by X-Ray Fluorescence on 10 positions

Machine

Micro Pioneer XRF2000 (X-Ray Fluorescence)

Bare board electrical test 3 Days $ 75/hour (On request) Select this test

説明

Automatic test to verify net continuity and the absence of shorts on the board.

Machine

MicroCraft EMX6151 Flying (Probe Bare Board Tester).

Price for a specific analysis on request

Hourly price : $ 75/hour

Minimum value for command : 1h

For more, please contact us to: sales@divsys.com

PCB Routing / Rework 3 Days $ 75/hour (On request) Select this test

説明

Rework of PCB like missing holes, incorrect profiles or board size corrections

Machine

Schmoll MX1-125

Price for a specific analysis on request

Hourly price : $ 75/hour

Minimum value for command : 1h

For more, please contact us to: sales@divsys.com


PCB Length

PCB Width

Length unit


PCB to be returned after testing


The delivery date of your analysis will be confirmed upon receipt of your PCBs in our laboratory.
To send your PCBs, please fill in the sending form emailed to you after placing your order.


関連する場合ファイルをドラッグアンドドロップまたは、クリックしてファイルを選択

ICAPE基板価格と納期にアクセス

アカウントの作成/サインイン


ICAPEおよびCIPEMショップの新機能

検証には最大1日かかる場合があります

既存のICAPEまたはCIPEMショップのクライアント

Test Testing time Cost Select
Microsection PCBA 3 Days $ 275 Select this test

Description

Extract a part of the PCBA to to look “inside” the PCBA at the quality of the PCB, solder joint or components One microsection that is “ground” to three locations within the solder connection The test includes:

• Three (3) locations in the solder connection (25%, 50%, 75%)

• Thickness of the solder between pin and pad

• Size of any voids in the solder connection

• Intermetallic thickness

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Chamber testing 3 Days $ 30/hour (On request) Select this test

Description

Thermal shock testing is a cycling of low and high temperature to accelerate failures caused by repeated temperature variations during normal use conditions. In our case, we can perform temperature and humidity variation.

Machine

T5S5 Environmental Test Chamber: Heat, Cold and Humidity

Price for a specific analysis on request

1 to 24 hours : $ 105/hour

Minimum value for command : 1h

For more, please contact us to: sales@divsys.com

Ion Chromatography 4 Days $ 450 Select this test

Description

Separates the different ions to be able to measure the concentration of each of them.

Ion Chromatography per IPC TM 650 method 2.3.28.

• Ion Chromatography (IC) is employed when the sample fails the IPC maximum acceptability or if the customer has defined a maximum concentration of a specific ION.

• For the Ion Chromatograph, there are two types of ions (Anions and Cations). In PCB fabrication, we are usually only concerned with Anions and hence the measurement standard using eqivalent micro grams of chloride.

• However, in the no-clean flux of PCBA processing, we also can have Cations. This requires a different measurement system. Both types of ions must be measured and noted for a PCBA.

Machine

Dionex ICS-2100, Dionex AQUION and ASDV

Dionex AQUION

ASDV

Ionic contamination 3 Days $ 250 Select this test

Description

Cleanliness Testing is used to measure the amount of ionic contamination left on the surface by the PCB process.

A cleanliness tester is filled with a solution of 75% AIPA and 25% DI H20 to dissolve the surface contamination.

The PCB (Or PCBA) is immersed in the solution. This is a Go / No go test that the PCB or PCBA is clean.

The resulting “dirty” solution is measured and converted to a standard using “Equivalent Micro Grams of Sodium Chloride” which is divided by the surface area of the sample to arrive at a ug/in2 or ug/cm2.

The IPC acceptance is < 10ug/in2 or < 1.65ug/cm2.

Standard cleanliness per IPC TM 650 method 2.3.25.

Machine

SCS Ionograph BT Series

Xray inspection 3 Days $ 105/hour (On request) Select this test

Description

Check the integrity of a solder connection for the PCBA or the alinement of the layer for the PCBA

• When evaluating the integrity of a solder connection, an X-RAY image is invaluable to be able to see the actual connection in a non-destructive fashion.

• The X-RAY image can be viewed at various angles to reveal the amount of “attachment between the PCB pads, the component pins and/or the BGA

Price for a specific analysis on request

1 to 4 hours : $ 105.00/hour

Minimum value for command : 1h

For more, please contact us to: sales@divsys.com

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Nordson Dage Quadra 3


PCB Length

PCB Width

Length unit


PCB to be returned after testing


The delivery date of your analysis will be confirmed upon receipt of your PCBs in our laboratory.
To send your PCBs, please fill in the sending form emailed to you after placing your order.


If relevant, drag&drop your file(s) or simply click to select your file(s)

Access ICAPE PCB prices and delivery time

アカウントの作成/サインイン


ICAPEおよびCIPEMショップの新機能

検証には最大1日かかる場合があります

既存のICAPEまたはCIPEMショップのクライアント


貨幣為替レート: 1€ =1.048600$
貨幣為替レート: 1€ = 1.048600 $