My account My order My quotes

Laboratory online service - PCB Testing and Analysis

Request a quote for the analysis of your printed circuit boards.
Choose the tests to be carried out, validate your quote and send us your PCBs for expertise.
Our laboratory will perform the tests and analyzes. We will answer you in 48H with a report following industrial standards.
Our laboratories are in China and North-America.



TestTesting timeCostSelect
Cross-Section2 Days$ 100 Select this test

Description

A cross-section will be performed and we will provide a report with measurement and expertise according to IPC standard.

Delivery report

IC Measurement according to IPC standard

Machine

KEYENCE VHX-5000- High-performance digital microscope

STRUERS LaboPol-20 - Auto-grinding machine

Ionic contamination2 Days$ 76 Select this test

Description

Ionic contamination measurement based on static method according to IPC-TM-650 (µg/cm2 equivalent NaCl Vs Time)

Delivery report

Ionic contamination static measurement in µg/cm2 equivalent of NaCl.
Report with IC data curve in µg/cm2 equivalent NaCl depending of the timing.

Machine

METRONELEC CT100- Ionic contamination tester

EDX Analysis5 Days$ 227 Select this test

Description

Find out what are the chemical components of your PCB on a dedicated area.

Delivery report

Report (EDX analysis)

Machine

HITACHI SU8230- EDX (Energy Dispersive X-Ray Spectroscopy)

Mechanical dimension small2 Days$ 119 Select this test

Description

Mechanical dimension checking with CpK report. 32 PCBs with maximum dimension 200x100m.

Delivery report

Mechanical Measurement + Cpk

Machine

KEYENCE IM6225 - Image dimension measuring system

Mechanical dimension large2 Days$ 144 Select this test

Description

Mechanical dimension checking. 1 PCB with maximum dimension 400x300m.

Delivery report

Mechanical Measurement

Machine

ASIDA 4030 - 2-Dimensional measurement machine

Tg test3 Days$ 102 Select this test

Description

Measure the glass transition temperature (TG)

Delivery report

Differential Scanning Calorimetry

Machine

TA Instruments Discovery DSC-25 - DTG Testor (Differential Scanning Calorimetry)

Solderability test2 Days$ 80 Select this test

Description

Solderability test by weeting balance method and meniscograph.

Delivery report

Solderability test according to IPC standard

Machine

ASIDA-KH23 - Solder pot

Thermal choc3 Days$ 126 Select this test

Machine

ESPEC TSE-12-A - Thermal Shock Tester

Delivery report

Thermal shock + 2 cross-section (before / After)

Description

Perform a cross-section, then perform thermal choc (-40 to + 150°C / 10s) and cross-section after thermal choc.

Gold / Nickel thickness2 Days$ 69 Select this test

Description

Perform gold and nickel thickness measurement (10 positions per PCB).

Delivery report

X-Ray Measurement (10 positions)

Machine

FISHER XDLM-PCB200 - XRF (Fischer)

Ageing test per 24HN/A$ 125 Select this test

Description

Perform one cross-section. Do ageing test (-40 to +150°C / 25 to 98% HR). Perform a second cross-section. Provide report with cross-section before and after ageing test and parameters

Machine

GWS EL-02KA - Temperature & Humidity Ageing Chamber

Delivery report

Ageing test + 2 cross-section (before / after)


PCB Length

PCB Width

Length unit


PCB to be returned after testing

The delivery date of your analysis will be confirmed upon receipt of your PCBs in our laboratory.
To send your PCBs, please fill in the sending form emailed to you after placing your order.


If relevant, drag&drop your file(s) or simply click to select your file(s)

Access ICAPE PCB prices and delivery time

Create account / Sign in


NEW to ICAPE AND CIPEM Shops

Validation can take up to one day

EXISTING ICAPE OR CIPEM Shops clients


TestTesting timeCostSelect
PCB Validation test3 Days$ 350 Select this test

Description

The test includes:

• Microsection PCB

• Solderability test

• Thermal Stress (10 second solder float)

• Thermal Stress coupon Evaluation for cracks, voids, de-lamination

• Surface Finish thickness by XRF measurement

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Microsection PCB3 Days$ 275 Select this test

Description

PCB Micro-section analysis of the copper and “hole” quality is the most thorough of all of the tests as it allows the examiner to look “inside” the PCB at the quality of the construction, the copper plating, the hole formation, the dielectric separation (which also defines the AC impedance), the lamination Process, and the base copper.

The IPC has defined 42 different “rejectable” defects that can be seen in one micro section.

The test includes:

• Extract a part of the PCB to to look “inside” the PCB

• In-hole Copper Thickness (Minimum of 6 readings)

• Base copper thickness (all layers)

• Plated copper thickness

• Wicking Length (if excessive)

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Microsection PCB Thermal shock (2 microsections)3 Days$ 500 Select this test

Description

Perform one cross-section before and after the thermal shock test (-40 to +150°C / 25 to 98% HR).

Provide report with cross-section before and after the thermal shock test.

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Microsection PCB Ageing test per 24H (2 microsections)3 Days$ 500 Select this test

Description

Perform one cross-section before and after the ageing test (-40 to +150°C / 25 to 98% HR).

Provide report with cross-section before and after ageing test.

Machine

Keyence VHX 7000 Microscope

Struers Micro Section System

Chamber testing3 Days$ 30/hour (On request) Select this test

Description

Thermal shock testing is a cycling of low and high temperature to accelerate failures caused by repeated temperature variations during normal use conditions. In our case, we can perform temperature and humidity variation.

Machine

T5S5 Environmental Test Chamber: Heat, Cold and Humidity

Price for a specific analysis on request

1 to 24 hours : $ 30/hour

Minimum value for command : 1h

For more, please contact us to: sales@divsys.com

Ion Chromatography4 Days$ 450 Select this test

Description

Separates the different ions to be able to measure the concentration of each of them.

Ion Chromatography per IPC TM 650 method 2.3.28.

• Ion Chromatography (IC) is employed when the sample fails the IPC maximum acceptability or if the customer has defined a maximum concentration of a specific ION.

• For the Ion Chromatograph, there are two types of ions (Anions and Cations). In PCB fabrication, we are usually only concerned with Anions and hence the measurement standard using eqivalent micro grams of chloride.

• However, in the no-clean flux of PCBA processing, we also can have Cations. This requires a different measurement system. Both types of ions must be measured and noted for a PCBA.

Machine

Dionex ICS-2100, Dionex AQUION and ASDV

Dionex AQUION

ASDV

Ionic contamination3 Days$ 250 Select this test

Description

Cleanliness Testing is used to measure the amount of ionic contamination left on the surface by the PCB process.

A cleanliness tester is filled with a solution of 75% AIPA and 25% DI H20 to dissolve the surface contamination.

The PCB (Or PCBA) is immersed in the solution. This is a Go / No go test that the PCB or PCBA is clean.

The resulting “dirty” solution is measured and converted to a standard using “Equivalent Micro Grams of Sodium Chloride” which is divided by the surface area of the sample to arrive at a ug/in2 or ug/cm2.

The IPC acceptance is < 10ug/in2 or < 1.65ug/cm2.

Standard cleanliness per IPC TM 650 method 2.3.25.

Machine

SCS Ionograph BT Series

Dimensional comparison to print3 Days$ 150 Select this test

Description

Mechanical dimension checking.

Machine

View Summit System (Non contact CMM).

Differential Scanning Calorimeter (DSC) test3 Days$ 350 Select this test

Description

Measure the glass transition temperature (TG) of the PCB.

Machine

Ta Instruments Q20 DSC (Differential Scanning Calorimeter).

Surface finish thickness (Au, Ni, Ag, Hasl, Sn)3 Days$ 150 Select this test

Description

Measurement of the surface finish thickness (Au, Ni, Ag, HASL, Sn) by X-Ray Fluorescence on 10 positions

Machine

Micro Pioneer XRF2000 (X-Ray Fluorescence)

Bare board electrical test3 Days$ 75/hour (On request) Select this test

Description

Automatic test to verify net continuity and the absence of shorts on the board.

Machine

MicroCraft EMX6151 Flying (Probe Bare Board Tester).

Price for a specific analysis on request

Hourly price : $ 75/hour

Minimum value for command : 1h

For more, please contact us to: sales@divsys.com

PCB Routing / Rework3 Days$ 75/hour (On request) Select this test

Description

Rework of PCB like missing holes, incorrect profiles or board size corrections

Machine

Schmoll MX1-125

Price for a specific analysis on request

Hourly price : $ 75/hour

Minimum value for command : 1h

For more, please contact us to: sales@divsys.com


PCB Length

PCB Width

Length unit


PCB to be returned after testing


The delivery date of your analysis will be confirmed upon receipt of your PCBs in our laboratory.
To send your PCBs, please fill in the sending form emailed to you after placing your order.


If relevant, drag&drop your file(s) or simply click to select your file(s)

Access ICAPE PCB prices and delivery time

Create account / Sign in


NEW to ICAPE AND CIPEM Shops

Validation can take up to one day

EXISTING ICAPE OR CIPEM Shops clients

Coming Soon !

Currency rate : 1€ = 1.125500$
Currency rate : 1€ = 1.125500 $
Accept

By continuing your navigation on this website, you accept the use of cookies to improve and personalize your navigation. For more information, please visit our Privacy Statement page or our use of cookies page to better manage your personal preferences. If you continue browsing our website, you accept the use of these cookies but you also have the option to refuse them and change your settings. To find out more about Cookies and to change the Cookies setting